Mining Company Fined $55,000 Following Worker Injury
RED LAKE, ON – Goldcorp Canada Ltd. pleaded guilty and has been fined $55,000 after a worker was injured while removing a tire from a mining scoop tram.
The incident occurred at the mining company’s Balmer Complex #3 Shaft 4200 Level underground maintenance garage, near Balmertown, Ontario.
On January 14, 2015, a Goldcorp worker employed as an underground mechanic was in the process of replacing a rear oscillating axle on a scoop tram. While removing the right rear core filled tire, the tire fell on the worker. Three other workers in the garage area responded and the 878-pound tire, with a 4-1/2-foot diameter, was lifted off the injured worker. The worker was transported to hospital for treatment.
The subsequent Ministry of Labor investigation revealed that Goldcorp did not have a written procedure for the work being performed on the tires and wheel assembly as required by Ontario’s Mining and Mining Plants Regulation. Specifically, there was no written procedure regarding the hazards associated with working with this particular task.
Goldcorp pleaded guilty to failing to ensure that it establish written procedures for the work performed on the tires and wheel assembly, contrary to the regulation.
The fine was imposed on October 26, 2016 in provincial court in Red Lake by Justice of the Peace Edith Baas.
In addition to the fine, the court imposed a 25-per-cent victim fine surcharge as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.
Court Information at a Glance
Location: Ontario Court of Justice, 115 Howey Street, Red Lake, ON
Judge: Justice of the Peace Edith Baas
Date of Sentencing: October 26, 2016
Defendant: Goldcorp Canada Ltd., 40 King Street West (Scotia Plaza), Toronto, ON
Matter: Occupational health and safety
Convictions:
- Occupational Health and Safety Act
Section 25(1)(c) - Ontario Regulation 854/90 (Mining and Mining Plants Regulation)
Section 107.1(1)
Crown Counsel: Mike Nicol
MORE INFO
- Join the conversation using #worksafeON and #workfairON
